Laserschweißdüsen & Führungsspitzen — Ein-/Doppeldraht, 0.8–2.0 mm (AS/BS/CS/DS/ES/FS)
Industrieersatzteil oder Verbrauchsmaterial von CHASE LASER für Faserlaser-Schneid-, Schweiß- und Wartungssysteme.
- Wählen Sie Modell und Spezifikation in den Produktoptionen.
- Vor dem Versand prüfen wir die Kompatibilität anhand von Kopfmodell, Teilenummer, Abmessungen oder Foto.
- Internationaler Versand mit Sendungsverfolgung per DHL, UPS oder FedEx.
Originale technische Details (Englisch)
Laser Welding Nozzles & Guide Tips — Full Spec Collection (Single/Dual Wire, 0.8–2.0 mm)
One product page, every spec you need. This listing covers copper laser welding nozzles and guide tips for handheld or robotic wobble heads, including classic A/B/C/H shapes, AS series (single-wire) & AS-D (dual-wire), BS anti-spatter series, and CS/DS/ES/FS series by wire size, plus guide tips (single/dual wire 0.8–2.0 mm). Choose your exact Specification from the dropdown.
- Material: High-conductivity red copper, precision-machined
- Wire sizes: 0.8 / 1.0 / 1.2 / 1.6 / 2.0 mm (as option values)
- Types: Single-wire / Dual-wire / Non-guide variants
- Finish: Smooth, concentric bore for stable gas flow; optional anti-spatter (BS series)
- Thread (typical): M11x1 (confirm with your welding head model; some heads may differ)
- Lengths (typical): 28 mm / 32 mm by series
- Use cases: Stainless steel, carbon steel, galvanized sheet, aluminum (match gas & wire)
Quick Selector (how to choose)
- Match your wire feed: AS = single wire; AS-D = dual wire; Guide Tips = dedicated wire guide parts.
- Pick wire size: 0.8 / 1.0 / 1.2 / 1.6 / 2.0 mm to match your filler wire.
- Spatter-prone jobs? Choose BS anti-spatter variants for galvanized/oily plates.
- Confirm thread: Typically M11x1; check your torch before ordering.
Series Overview
| Series / Shape | Wire Mode | Wire Size (mm) | Key Notes |
|---|---|---|---|
| A / B / C / H | Non-guide | — | Classic shapes for general welding & gas shaping |
| AS-08 / AS-10 / AS-12 | Single-wire | 0.8 / 1.0 / 1.2 | Stable feed and focus for single wire |
| AS-10D / AS-12D / AS-16D / AS-20D | Dual-wire | 1.0 / 1.2 / 1.6 / 2.0 | Dual-wire grooves; balance seam formation |
| BS-1.0 / BS-1.2 / BS-1.6 | Single-wire | 1.0 / 1.2 / 1.6 | Anti-spatter design for dirty/galvanized surfaces |
| BS-16 / BS-20 | Single-wire | 1.6 / 2.0 | Large-bore single-wire options |
| CS / DS / ES / FS | Single-wire | 0.8 / 1.0 / 1.2 / 1.6 | Series by bore size; stable gas flow |
| Guide Tip (single) | Single-wire | 0.8 / 1.0 / 1.2 / 1.6 | Precision wire guidance and burn-back reduction |
| Guide Tip (dual) | Dual-wire | 1.0 / 1.2 / 1.6 / 2.0 | Dual-wire alignment, consistent fillet build-up |
Compatibility
Fits most handheld laser welding heads using M11x1 nozzles (e.g., Raytools, WSX, BWT, BOCI, OSPRI). If your torch uses a different thread or special seat, contact Chase Laser for a quick match.
Installation & Care
- Power off and cool down before replacement; check O-rings and seat surface.
- Center the wire in the bore; verify wire feed without rubbing the nozzle.
- Keep the orifice clean; remove spatter build-up to maintain gas laminarity.
- Replace when the bore is worn, out-of-round, or gas protection becomes unstable.
What You Get
1 x nozzle or guide tip of your chosen specification (consumable part; pictures for reference).
FAQs
Q1: Single vs. Dual wire? Single wire (AS/CS/DS/ES/FS) is standard; dual wire (AS-D, dual guide tips) feeds two wires for faster fill and wider seams.
Q2: When to pick BS anti-spatter? For galvanized or contaminated surfaces where spatter is likely; it helps keep the bore cleaner.
Q3: How do I confirm thread? Most handheld heads use M11x1; check the manual or measure your original nozzle. Contact us if unsure.
Note: Dimensions and lengths may vary slightly by series and manufacturer revisions. Always verify your torch model and thread before ordering. Need a Spanish or Portuguese version of this page? We can provide it on request.
Die Frachtkosten werden nach Ziel, Gewicht und Kartongröße bestätigt. Wir versenden normalerweise mit DHL, UPS oder FedEx inklusive Sendungsverfolgung.
Bei Unsicherheit senden Sie vor der Bestellung Schneidkopfmodell, Quellenmodell, Teilenummer oder Abmessungen. Kundenspezifische, speziell bestellte oder geöffnete Optikteile werden gemäß den vereinbarten Bedingungen behandelt.