Chase Laser | S&A CWFL-3000 / CWFL-6000 Fiber Laser Chiller

TEYU S&A CWFL Fiber Laser Chiller — Models: CWFL-3000 (for 3 kW fiber lasers) / CWFL-6000 (for 6 kW fiber lasers).

Key Features

• Dual temperature circuits (LT / HT): simultaneously cools the laser source and the optics/head.
• Temperature stability: up to ±0.5 °C (CWFL-3000, per model) / ±1 °C (CWFL-6000, typ.).
• Control range: 5–35 °C, constant & intelligent modes; Modbus-485 communication.
• Protection & alarms: flow & over-temperature alarms, water-level/ sensor protection, compressor delay, fault records.
• Plumbing: dual inlets/outlets dedicated to laser & optics; built-in filter/strainer and drain ports (fittings vary by model code).
• Power options: CWFL-3000 available as 1P 220–240 V or 3P 380 V (per code); CWFL-6000 typically 3P 380 V, 50/60 Hz.
• Use cases: metal cutting/welding with 3 kW & 6 kW fiber lasers (Raycus, IPG, MAX, etc.).

Model Guide

What We Need to Confirm Before Shipping

1. Model required (CWFL-3000 / CWFL-6000)
2. Voltage / phase available at your site (e.g., 220–240V 1P or 380V 3P)
3. Hose size & length, routing constraints, and water quality
4. Target setpoints for laser loop and optics loop
5. Matched laser brand & model (e.g., Raycus RFL-3000CE / 6000CE)

In the Box

• CWFL series chiller (selected model & voltage)
• Standard fittings & documentation
• Basic consumables (filter/strainer) — varies by region

Usage & Maintenance Tips

• Use deionized / clean water with corrosion inhibitor as recommended; replace on schedule.
• Keep the inlet filter clean; ensure adequate airflow around the unit.
• Set different setpoints for laser loop and optics loop to prevent condensation.

Notes: Specifications may vary with the exact model code and region. Contact us for the official datasheet and a compatibility check.